Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
48
6.3 DRIVE BELTS
ONLY IN THE MOD. FR/D E P-FR/D
Drive belts must be properly tensioned at all times to avoid excessive flopping
and slipping.
New belts
If belts are new check tightness of the belt at least after 2 hours of work.
Used belts
If belts have been used for more than 24 hours, check belts wear and if
necessary retighten them.
6.3.1 B
ELTS ADJUSTMENT
M
OD
.
FR/D
In order to adjust belt tension proceed
as follows:
- Loosen the two bolts (A);
- Loosen the nut (B) to tension belts;
- Tighten the nut (C).
To Next Page
Loading...
