Galfre P-FR/D 210 - Belts Adjustment Mod. P-FR;D; Belt Replacement

Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
49
6.3.2 B ELTS ADJUSTMENT M OD . P-FR/D
In order to tension or maintain belts tension loosen the nut (A) and tighten
the nut (B).
6.3.3 B ELT REPLACEMENT
ATTENTION!
Never replace one belt only. When a belt is worn,
always replace all belts.
In order to replace belts, remove the safety guard by loosening the
tightening screw, loosen linkage check rods, remove belts and replace them
with new ones.
Use belt type ROFLEX TS B101 17x2565 L
i
/2608 L
d
.
After replacement of the belt reposition the safety guard and tighten bolts.