Foot Pedal – Operates Clamp
How to use Custom Stretcher Plates
The Custom Stretcher Plates, shown below, are included with your machine. The (4)
screws on the bottom of the stretcher bar slide into the slots of the “stretcher bar” as
shown below.
Setting-up Stretcher Plates
Video: http://www.youtube.com/watch?v=94rntl0C0rY
Position both stretcher plates in the middle of the stretcher bar. Favoring one side may
cause the stretcher bar to bind so always stretch canvas from the center of the machine.
Place an assembled wood stretcher frame on top of the stretcher plates as shown below.
To Next Page
Loading...