SPECIFICATIONS
Frequency Response 68Hz to 20kHz
Sensitivity 90 dB
Nominal Impedance 8 Ohms
Power Handling 150 Watts
Crossover None
Driver Two 4” dynamic hyperbolic carbon fibre drivers
Tweeter Patented Cylindrical Diaphragm Transducer (CDT3)
Dimensions W - 34.3cm (13.5”)
H - 12.7cm (5”)
D - 19.1cm (7.5”)
Weight 5.2Kg
Cone Material Carbon Fibre
Enclosure Material Powder coated cast aluminium chassis with brushed stainless steel spheres
Warranty 5 years
WARNING
Care must be taken when installing, mounting or standing
this product to walls, ceilings or surfaces.
Appropriate fasteners must be used (where required) to
ensure the safe installation of both the speakers and mounts.
If you are in any way unsure of the correct installation,
assembly or use then please consult qualified sources
before taking unnecessary risks.
The manufacturer, distributor or their agents cannot be held
responsible for any injury as a result of improper use or
installation of this product.
12
To Next Page
Loading...