Searching for Keyword
Search for keywords such and “bait release” and “Compass Calibration” to nd a topic. If you are using
Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to search.
Printing this document
is document supports high resolution printing.
Using this manual
Legends
Read before rst ight
Read these instructions before using the Gannet Pro / Pro+.
Read the ENTIRE instruction manual. Watch the instructional videos. Become familiar with the features of
the drone before operating. Failure to operate the drone correctly can result in damage to the drone, personal
property and cause serious injury.
* If the drone will not hover in one place it is likely the compass calibration process will need to be redone.
See instruction later in the manual.
* DO NOT pull the throttle all the way down when ying. is will make the motors idle and the drone will
fall out the sky.
* If the drone suddenly starts ying erratically in GPS mode, it is recommended to switch to ALT mode (E
switch to the middle position) to take full manual control over the ight of the drone.
*DO NOT use a charger higher rated than 5.5v for the remote controller.
In this guide:
Gannet Pro / Pro+ User Manual
Gannet Pro / Pro+ Quick Start Guide
Gannet Pro / Pro+ Safety and Disclaimer Guidelines
Gannet Pro / Pro+ Battery Safety Guidelines
It is strongly recommended that you watch our tutorial videos on our Ocial Gannet Tutorials YouTube
page and read the quick-start guide before you take your rst ight. All the information you need for your
rst ight can also be found in this manual.
WARNING
To Next Page
Loading...
