4
ASSEMBLY INSTRUCTIONS
1. Unfold two corner panels (A), then insert the lower
ends of a crossbeam (B) into the corner panels (A).
Secure with bolts (BB). Hand tighten only.
Repeat the procedure for the remaining corner
panels (A) and crossbeams (B).
Note: When assembling, keep the side of the
crossbeams (B) with the hole facing the inside.
Lowes.com/gardentreasures
2. Attach top corner connector (J) onto corner panel (A).
2
3. Insert corner bar connectors (E) into top corner
connectors (J). Secure with bolts (BB). Hand
tighten only.
J
A
Hardware Used
Bolt
BB
1
A
B
Hardware Used
Bolt
BB
8
3
E
BB