13
GB
The Trimmer must not be operated during
charging.
Only charge battery between 10 – 45 °C. After
heavy duty service allow battery to cool down
first.
Storage:
The trimmer must not be stored over 35 °C or
under direct exposure to sunlight.
Do not store the trimmer in places with static
electricity.
DANGER !
Risk of injury!
Fit cover and plant guard:
5
2
3
4
1
3. Assembly
Risk of injury from blade!
V Always ensure the cover is fitted! The Trimmer should
not be used without the cover being fitted.
1. Turn Trimmer round and place on rubber pad of handle.
2. Pull cover
1
over blade
carrier
2
.
3. Attach cover
1
to hook
3
and screw down with both
screws
4
.
4. Slide plant guard
5
onto
Trimmer until connection
audibly snaps into place.
The plant guard keeps plants
which are not to be trimmed
back away from the blade.
20 plastic blades and a magazine for spare blades are supplied
with your trimmer. Up to 8 spare blades can be stored in the
magazine.
1. Slightly widen magazine
6
at open point and slide onto
handle
7
.
2. Insert up to 8 plastic blades
z
m
in the magazine
6
until the
blades jam.
To fit blade into blade carrier see 8. Troubleshooting
“Replacing blades”
.
Fit magazine for
spare blades:
7
6
z
m
To Next Page
Loading...
