Side discharge attachment
Use the side discharge attachment when using the product for side discharging.
1. Open the side deflector guard (20), hold it in position and align the hooks
on the attachment (19) with the rods to hang it onto (Fig. 14).
2. Lift the side deflector guard (20) and pull the attachment (19) off the rods
to remove it.
3. Use the side discharge follow the step.1 and 2(Fig.15)
Cutting height adjustment
Adjust the cutting height according to the needs of your lawn. The cutting
height depends on the kind of lawn and its actual height. When mowing high
grass, start with the maximum cutting height and make a second cut with a
lower cutting height.
1. Move the lever forward or backward to adjust the cutting height (Fig. 16.).
Fig.16
To Next Page
Loading...