1. Turn the Table Top (A) upside down and slide the legs (B) into
the receiver on the table top. See Fig.1
2. Attach the Upper Center Ring (D) to the legs using one M6*55
screw (E), one washer (F) and one nut (G). Repeat this step to
attach the other legs. Do not fasten at this time. See Fig.2
Assembly Intructions
USA
1877 579 1550
info@westfieldoutdoors.com
AFTER SALES SUPPORT
MODEL: 44643
5
05
FIG.1
FIG.2
B
A
D
E
F
G
To Next Page
Loading...
