Gardner Bender BigBen 910B - Page 6

4. Bend until the point on
the top of the conduit
bender aligns with
desired teardrop arrow.
Please see Figure
3 & 4.
*Overbend slightly to
adjust for conduit metal
springback.
*Cut off any excess
conduit using Vise-mate
™
feature. Please see
Figure 5.
5. When using models 930B, 932, 931B,
931H, 930H and 932H, vial will level at
45° & 90°.
Figure 3
Figure 4
Figure 5
Point at tip
of Bender
Insert conduit through
ViseMate™ opening and cut
conduit to desired length
MA
DE
I
N
Line of Sight
Figure 6
M
A
D
E
I
N
Vial Level
Vial Level
3
Aluminum Bender Book 7/11/07 11:31 AM Page 7