Default Watch Face
Alternate time zone pointer. References the 24-hour time markings on the watch (Adding Alternate Time
Zones, page31).
No-fly time remaining. References the 24-hour time markings on the watch (No-Fly Time, page8).
Surface interval (SI) time after a dive (Viewing the Surface Interval Glance, page21).
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must install a watch face from the Connect IQ store
(Connect IQ Features, page135).
You can customize the watch face information and appearance, or activate an installed Connect IQ watch face.
1 From the watch face, hold MENU.
2 Select Watch Face.
3 Press UP or DOWN to preview the watch face options.
4 Select Add New to create a custom digital or analog watch face.
5 Press START.
6 Select an option:
• To activate the watch face, select Apply.
• To change the style of the numbers for the analog watch face, select Dial.
• To change the style of the hands for the analog watch face, select Hands.
• To change the style of the numbers for the digital watch face, select Layout.
• To change the style of the seconds for the digital watch face, select Seconds.
• To change the data that appears on the watch face, select Data.
• To add or change an accent color for the watch face, select Accent Color.
• To enable a low brightness mode for the watch face while in dark environments, select Lume.
• To change the time zone used for the alternate time zone pointer on the default watch face, select Alt.
Time Zones (Editing an Alternate Time Zone, page32).
NOTE: The alternate time zone pointer uses the first alternate time zone from the list.
• To change the color of the data that appears on the watch face, select Data Color.
• To remove the watch face, select Delete.
Appearance 85
To Next Page
Loading...
Need help?
General
