Surround View Camera System
WARNING
Do not solely rely on this system for vessel docking and operation purposes.
Objects displayed by the cameras may be closer than they appear.
This system is only intended to enhance situational awareness when used properly. If used improperly, you
could become distracted by the display. Failure to pay attention to your surroundings during vessel docking and
operation could cause you to miss obstacles or hazards in or around the water, leading to an accident causing
property damage, personal injury, or death.
The surround view camera system is a set of dedicated cameras installed and configured to provide a
complete bird's-eye view of your vessel to easily see your immediate surroundings. You can also view video
feeds from any of the dedicated cameras in the system to help with maneuvering and docking.
The surround view camera system is available only on select vessels and is installed in the factory.
To view the surround view camera screen, from the home screen, select A/V, Gauges, Controls > Surround
View.
Item Description Information
Bird's-eye view
The bird's-eye view is always
shown on the surround view
camera screen.
You can include the bird's-eye view
as part of a combo with another
screen, such as a chart.
Individual camera feeds
By default, two individual camera
feeds are shown on the surround
view screen. You can customize
this to show only one camera
instead.
You can quickly change which
cameras are shown in these feeds.
Selected camera indicator
This indicator shows which camera
is shown in the individual camera
feed.
Visual bumper
You can enable and configure the
visual bumper to show a line on the
birds-eye view that can help you
judge how close objects are to your
boat.
Surround View Camera System 141
To Next Page
Loading...
Need help?
General