18 CLEANING, CARE
98
– Push back the protection caps on the handlebar controls to allow
water to evaporate.
– After the motorcycle has cooled down, lubricate all moving parts
and pivot points.
–
Clean the chain. ( p. 54)
– Treat bare metal (except for brake discs and the exhaust system)
with a corrosion inhibitor.
Preserving materials for paints, metal and rubber ( p. 110)
– Treat all plastic parts and powder-coated parts with a mild cleaning
and care product.
Special cleaner for glossy and matte paint finishes, metal and
plastic surfaces ( p. 111)
To Next Page
Loading...
Need help?
General
