To Next PageTo Next Page
Need help?Do you have a question about the Gason 7370 Series and is the answer not in the manual?
General| Type | Air Seeder |
|---|---|
| Transmission | N/A (Tractor Drawn) |
| Hydraulic Remotes | 2-4 |
| PTO Speed | N/A (Tractor Drawn) |
| Fuel Tank Capacity | N/A (Tractor Drawn) |
Key safety rules and precautions for spreader operation.
Precautions to take before working on the hydraulic system.
Steps to secure the spreader when left unattended.
Safety advice for maintenance or repair work on the spreader.
Guidelines and restrictions for safe transportation of the spreader.
Technical dimensions of the 7350 and 7370 spreader models.
Unloaded and loaded weight specifications for the spreader.
Storage capacity of the spreader bin by volume and weight.
Specifications for the rear tyres and recommended pressure.
Hydraulic system specifications including capacity and pressure.
Details of the drive system including gearbox and lubrication.
Information on bolt markings and recommended assembly torque values.
Overview of the assembly process and factory checks.
Instructions and precautions for lifting the spreader.
List of checks to be carried out before the spreader is delivered.
Guidance on connecting hydraulic hoses to the tractor's hydraulic system.
Essential pre-operation checks and considerations for the spreader.
How to adjust the spreader for various materials.
How to adjust spinner speed for optimal and accurate spread patterns.
Steps to engage and disengage the jockey wheel for operation.
Methods and factors for setting the correct application rate of material.
Factors determining spread width and how to test it.
Method for determining product bulk density using the density meter.
Instructions for changing the gearbox ratio for different application needs.
Steps to adjust the rear door for desired spreading height and output.
Overview of setting application rates using charts or calibration.
Step-by-step procedure for calibrating the spreader's application rate.
Importance of regular maintenance for trouble-free spreader operation.
Daily checks to ensure the spreader is in good working order.
Weekly checks for the spreader's components.
Comprehensive maintenance tasks to perform at the end of the season.
Troubleshooting common issues with transport and towing.
Solutions for issues related to spinner speed variations during operation.
Troubleshooting common problems with the product spread pattern.
Troubleshooting issues with the tachometer display.
Troubleshooting hydraulic motor oil leaks.
