Gateway 400 - Replacing the Palm Rest Assembly

55
Replacing the palm rest assembly
www.gateway.com
Replacing the palm rest assembly
Tools you need to complete this task:
Screws removed during this task:
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 3.0 mm
(keyboard)
2 chrome 2.5 × 4.7 mm
(hard drive kit)
4 chrome 2.0 × 3.0 mm
(cooling assembly)
1 chrome 2.0 × 3.0 mm
(LED indicator panel)
2 black 2.5 × 4.0 mm
(LED indicator panel)
12 chrome 2.5 × 5.0 mm
(palm rest bottom)
3 black 2.5 × 4.0 mm
(palm rest top)
1 chrome 2.5 × 3.0 mm
(grounding screw)