7
Starting the monitor
www.gateway.com
2 Turn on your computer.
3 After your computer is running, the power LED on the monitor should be
green. If not, check the connections. For more troubleshooting
information, see “Troubleshooting” on page 17.
4 Adjust the controls to get the ideal image size and position for you. For
more information, see “Adjusting monitor settings” on page 8.
Caution Do not store tapes or diskettes next to the monitor because
the monitor generates a strong magnetic field during
startup. This field can erase or damage data stored on
magnetic tapes or diskettes.
To Next Page
Loading...
