44
www.gateway.com
Replacing the palm rest assembly
Tools you need to complete this task:
Screws removed during this task:
To replace the palm rest assembly:
1 Follow the instructions under “Preventing static electricity discharge” on page 5.
2 Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in “Preparing the notebook” on page 6.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
Torx T8 screwdriver
4 chrome 2.5 × 2.5 mm
(hinge cover)
5 chrome 2.5 × 2.5 mm
(keyboard)
1 chrome 2.5 × 2.5 mm
Torx
(mini-PCI card)
6 chrome 2.5 × 2.5 mm
(LCD panel assembly)
2 chrome 2.5 × 2.5 mm
(LCD plug)
8 chrome 2.5 × 4 mm (top, palm rest)
2 chrome 2.5 × 2.5 mm (top, palm rest)
4 chrome 2.5 × 4 mm
(bottom, palm rest)
To Next Page
Loading...
