Gateway Solo 2100 - Page 36

36 Gateway Solo™ 2100 Multimedia Notebook
6. Turn the system over and remove the battery pack.
7. Locate the memory module access panel.
8. Remove the screw and set it aside.
9. Use your thumb to press against the edge of the expansion memory
access panel and lift it away.
10. Gently insert the memory module into one of the sockets.
Caution: Do not force the memory module.
11. Replace the memory access panel and the screw.
12. Reinstall the battery and reconnect the AC power.
13. Power up the system.
Figure 31. Locating the Memory Module Access Figure 32. Locating the Memory Module Socket
Figure 33. Inserting a Memory Module
If you choose, you can verify the additional memory through the Main menu.
à
See page 30.
à
See page 53.