224
Chapter 16: Restoring Software
www.gateway.com
3 Select NT 4.0 Driver Locator, then press ENTER. The Windows NT 4.0 Driver
Locator utility opens and detects the hardware drivers.
4 When prompted to do so, press any key to continue. The
Windows NT 4.0 Drivers List screen appears. The list shows the devices
in your computer with the names and locations of each driver.
5 If you want to print the Windows NT 4.0 Drivers List (parallel port printers
only), press P. Make sure your printer is connected and turned on.
- OR -
If you do not want to print the
Windows NT 4.0 Drivers List, write down
the contents of each device’s
Name and Location fields.
6 Exit the program by pressing X.
7 Remove Disc 1 of the System Restoration Kit, then restart your computer.
8 Go to the next section for instructions to reinstall the drivers.
To Next Page
Loading...
