EasyManua.ls Logo

Gateway Solo 5300 - Reinstalling Windows Operating System

Gateway Solo 5300
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
230
Chapter 16: Restoring Software
www.gateway.com
15 In the Install Driver text box, type the drive letter (usually D:\ where D
is the drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in Locating
Windows NT 4.0 drivers on page 223.
16 Click OK.
17 Reinstall your audio device driver by following the on-screen
instructions.
18 If required, go to Reinstalling Windows NT 4.0 modem device drivers
on page 230. Otherwise, go to Reinstalling the Windows NT 4.0 Service
Pack on page 234.
Reinstalling Windows NT 4.0 modem device drivers
Use the instructions in this section to reinstall the drivers that support the
modem in your computer.
To reinstall the Windows NT 4.0 modem device driver:
1 Make sure you ran the Windows NT 4.0 Locator utility to find the modem
driver. For more information, see Locating Windows NT 4.0 drivers on
page 223.
2 Place Disc 1 of the System Restoration Kit into your CD/DVD drive.
3 If the CD starts automatically, close the CD window.
4 If the driver location information for your modem driver ends with a file
name (for example, setup.exe), go to Step 5.
- OR -
If the driver location information for your modem driver ends with a
backslash (\), go to Step10.
5 Click Start, then select Run. The Run dialog box opens.
6 In the Open text box, type the drive letter (usually D:\ where D is the
drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in Locating
Windows NT 4.0 drivers on page 223.

Table of Contents

Related product manuals