2
5 Select Search for the best driver for your device (recommended), then click
Next until the driver finishes installing.
6 Click Finish, then click No when you are prompted to restart the
computer. The PCI bridge driver is now installed.
7 When the New Hardware Found (USB Open Host Controller) dialog box
opens, click Next.
8 Select The updated driver (Recommended), then click Next.
Important Whenever the setup wizard detects an old driver on your
system and asks “What do you want to install?”, select The
updated driver (Recommended).
05549.fm Page 2 Tuesday, November 9, 1999 11:44 AM
To Next Page
Loading...
