Docking your Solo 9300 for the first time 3
9
Click Next until the driver finishes installing, then click Finish.
10 If the New Hardware Found (PCI Ethernet Controller) dialog box opens,
click
Next. Otherwise, go to Step 16.
11 Clear the Floppy disk drives check box, then select the Specify a location
check box.
12 Insert the Portable System Restoration CD into the CD/DVD drive, then
click
Browse. If the Portable System Restoration CD program autostarts,
close it.
13 If your notebook uses Windows 98, select the path
d:\9300\9300pro\lan\w98w2000\, then click OK.
- OR -
If your notebook uses Windows 95 or Windows NT, select the path
d:\9300\9300pro\lan\w95nt40\, then click OK.
14 Click Next until the driver finishes installing.
15 Click Finish, then click No when you are prompted to restart the
computer.
16 If the New Hardware Found (Modem) dialog box opens, click Next.
Otherwise, go to Step 22.
05549.fm Page 3 Tuesday, November 9, 1999 11:44 AM
To Next Page
Loading...
