4
17 Clear the Floppy disk drives check box, then select the Specify a location
check box.
18 If the Portable System Restoration CD is not already in the drive, insert it
into the CD/DVD drive, then click
Browse. If the Portable System
Restoration CD program autostarts, close it.
19 If a PCI Ethernet controller was previously detected, select the path
d:\9300\9300pro\modem\win95-98\, then click OK.
- OR -
If a PCI Ethernet controller was not previously detected, select the path
d:\9300\win95-98\modem\, then click OK.
20 Click Next until the driver finishes installing.
21 Click Finish, then click No when you are prompted to restart the
computer.
22 If additional “New Hardware Found” dialog boxes open, complete the
wizards by following the on-screen instructions. All necessary drivers are
installed.
23 Restart your notebook.
05549.fm Page 4 Tuesday, November 9, 1999 11:44 AM
To Next Page
Loading...
