Gateway Solo 9300 - Connecting the modem

Changing power settings 107
4 Change any of the following settings:
■ To run the processor at full speed regardless of the power source,
change the
Running on batteries setting to Maximum Performance.
■ To run the processor at reduced speed (using less power) regardless
of the power source, change the
Plugged in setting to Battery
Optimized Performance
.
■ To disable SpeedStep technology control, click Advanced, select the
Disable Intel SpeedStep technology control check box, then click OK.
■ To remove the SpeedStep icon from the taskbar, click Advanced,
select the
Remove icon from taskbar check box, then click OK.
5 Click
OK. Your changes to power management settings are saved.