112 Upgrading Your Notebook
Adding PC Cards
Your notebook has two PC Card slots (also known as PCMCIA card slots).
These slots accept Type I, II, III, and Zoomed Video cards.
You do not need to restart your notebook when changing most cards because
your notebook supports hot-swapping. Hot-swapping means that you can
insert a PC Card while your notebook is running. If your PC Card does not
work after hot-swapping, refer to the PC Card manufacturer’s documentation
for further information.
To insert a PC Card:
■ Push the card firmly into the PC Card slot label-side up until the outer
edge of the card is flush with the side of the notebook. A Type III card
must be inserted into the lower slot.
Important If you are using a Type III PC Card, it must be inserted into
the bottom slot.
To Next Page
Loading...
