118 Upgrading Your Notebook
Installing memory
Your notebook uses memory modules called SO-DIMMs (Small Outline Dual
Inline Memory Modules). The modules are available in various capacities and
any module can be placed in any available slot. Use only PC100 memory
modules for upgrading your memory.
To add or replace memory modules:
1 Shut down your notebook, then remove the battery and disconnect all
power cords. Follow the precautions stated in “Preventing static
electricity discharge” on page 117.
2 Remove the memory bay cover screws, then remove the memory bay
cover. For the location of the memory bay cover, see “Bottom” on page 7.
Warning To avoid injury, disconnect all power cords and remove the
battery before removing the memory bay cover. Replace
the memory bay cover before reconnecting power.
To Next Page
Loading...
