Gateway Solo 9300 - Using Composite Video or S-Video

Using composite video or S-Video 153
Using composite video or S-Video
The Composite Video Out connection lets you view your notebook display on
a TV screen using a standard RCA video cable. The S-Video Out connection
lets you view your notebook display on a TV screen using a standard S-Video
cable.
The Composite Video In connection lets you view video or still images from a
VCR or video camera using a standard RCA video cable. The S-Video In
connection lets you view video or still images from a VCR or video camera
using a standard S-Video cable. Functionality of these Video In connections
depends on your notebook.
The MGI VideoWave III video capture program lets you capture motion video
or still images and store them on your hard drive. For more information on
using MGI VideoWave III, see “Using MGI VideoWave III” on page 77.
To connect your docking station to a TV:
1 Connect one end of a standard RCA video cable to the Composite Video
Out connection on the docking station, or connect one end of a standard
S-Video cable to the S-Video Out connection on the docking station.
2 Connect the other end of the cable to the Video In connection on your
television or VCR.
3 Switch the display to Composite Video Out or S-Video Out by pressing
F
N+F3.
4 Reset your display screen area to 640
× 480 resolution with large text fonts
for best viewing.
Important To enable external video by default, connect the TV (or
other external viewing device) before starting your
notebook.
Important DVD playback to a VCR will be scrambled by copyright
protection technology.