Starting your notebook 13
Starting your notebook
To start the notebook:
1 Open your notebook by sliding the latch on the front of your notebook
to the right and lifting the LCD panel.
2 Press the power button located above the keyboard.
The power button is preset to On/Off mode. However, you can also set
it to function in Standby/Resume mode. For instructions on changing
the power button mode, see “To change advanced power management
settings:” on page 103.
3 To adjust the viewing angle of the display, tilt the display panel forward
or backward.
4 To control display brightness, press the F
N key together with the up arrow
or down arrow key.
This notebook is shipped with the backlight dimmer feature enabled. The
dimmer cuts display power 50% when your notebook is operating on
battery power. To learn how to disable this feature, see “Disabling the
backlight dimmer” on page 105.
5 If you are starting your notebook for the first time, follow the on-screen
instructions to set up your notebook.
Power button
To Next Page
Loading...
