12
www.gateway.com
Replacing the bezel
If the bezel was mounted incorrectly, complete the following procedure.
To replace the bezel:
1 Insert the small flat blade screwdriver under the bottom right corner of
the keyboard bezel and pry up.
2 Pull the bezel off the notebook. You will hear small snapping sounds as
the bezel comes away from the notebook. Be careful to not break off the
tabs found on the left end of the bezel.
3 Slide the two tabs found on the left end of the bezel under the notebook
frame and press down on the bezel in several places until it clicks in place.
Warning If the bezel is not correctly replaced, your notebook could
be damaged when you try to close the LCD panel.
MAN SYS US SL9500 KB UPD R0
To Previous Page
Loading...
