112
Chapter 7: Using Multimedia
www.gateway.com
10 On the Solo 9500, click the Displays tab. Click the tab in the upper left
corner of the TV option. TV is now selected as your primary display. Click
Apply.
-OR-
On the Solo 9550, click the
TwinView tab. Click Output Device. From the
menu, select
Select Output Device. Select TV out and click Apply.
11 Click OK.
Capturing video
MGI VideoWave IV is a video capture program that lets you capture and edit
full-motion video, single images, and audio through the IEEE 1394 (also
known as Firewire or i.Link) port. If your notebook has the IEEE 1394 port
installed, MGI VideoWave IV has already been installed on your system.
To use MGI VideoWave:
1 Connect the IEEE 1394 jack on your external source, such as a video
camera, to the IEEE 1394 port (if available) on the side of your notebook.
2 Click Start, then select All Programs, then MGI VideoWave IV. The program
starts. For more information on using MGI VideoWave, see its online
Help.
To Next Page
Loading...
