162
Chapter 12: Upgrading Your Notebook
www.gateway.com
Installing memory
Your notebook uses memory modules called SO-DIMMs (Small Outline Dual
Inline Memory Modules). The modules are available in various capacities and
any module can be placed in any available slot. Use only PC133 memory
modules for upgrading your memory.
To add or replace memory modules:
1 Follow the instructions under “Preventing static electricity discharge” on
page 161.
2 Shut down your notebook, then disconnect the power adapter and
modem cable.
3 Turn the notebook over, then remove the main battery (and second
battery, if installed). For more information, see “Changing batteries” on
page 121 and “Installing a second battery” on page 123.
4 Remove the memory bay cover screw, then remove the memory bay
cover.
Warning Disconnect the power adapter, remove the battery, and
disconnect the modem cable before you remove the
memory bay cover. Replace the cover before you restore
power or reconnect the modem cable.
Memory bay
cover
To Next Page
Loading...
