183
Connecting to the docking station
www.gateway.com
Connecting to the docking station
You can attach your notebook to the docking station while your notebook is
off, on, or in Standby/Suspend mode.
To dock your notebook:
1 Refer to the docking station’s packing materials for first-time setup
instructions.
2 Connect external devices to the docking station.
3 Lift the release latch on the docking station.
4 Align the connector holes on the bottom of your notebook with the
connector posts on the docking station, then press down on the release
latch until it snaps into place.
Important When the notebook is docked, the docking station must be
connected to AC power to function properly.
To Next Page
Loading...
