259
Software support tools
www.gateway.com
■ Not all diskettes are IBM-compatible. Make sure the diskette you are using
is IBM-compatible.
■ Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
You receive a “Disk is full” error message
■ Delete unnecessary files on the diskette.
■ Try a different diskette. Occasionally diskettes are flawed and cannot be
read by the diskette drive.
■ Run ScanDisk on the diskette. For more information, see “Checking the
hard drive for errors” on page 221. If errors are detected and corrected,
try using the diskette again.
You receive a “Non-system disk” or “Disk error” error message
■ Eject the diskette from the diskette drive, then press ENTER.
■ Make sure the diskette you are using is IBM-compatible.
The light on the diskette drive is lit continuously
■ Remove the diskette from the drive. If the light stays on, try restarting
your computer.
File management
A file was accidentally deleted
To restore deleted files:
1 Double-click the Recycle Bin icon.
2 Right-click the file you want to restore, then select Restore. The file
is restored to the place where it was originally deleted from.
If the Recycle Bin was emptied before you tried to restore a file, the
file cannot be recovered.
To Next Page
Loading...
