254
Chapter 16: Restoring Software
www.gateway.com
To reinstall device drivers:
1 Place Disc 1 of the System Restoration Kit into your CD/DVD drive. The
System Restoration Kit program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2 Click Start, then select Run. The Run dialog box opens.
3 In the Open text box, type D:\RUNMENU.EXE (where D is the drive letter
of your CD/DVD drive).
4 Click OK. The System Restoration Kit program starts.
5 If the Welcome to the System Restoration Kit window opens, close it by
clicking
OK.
6 Click the Reinstall tab.
7 If there is a Find More button at the bottom of the window, complete
the list of available device drivers by clicking
Find More and following the
on-screen instructions.
8 Click Automatic Installation, then select multiple device drivers to reinstall.
- OR -
Click
Manual Installation, then select a single device driver to reinstall.
9 Click Install.
10 Follow any additional on-screen instructions. Depending on the device
driver you are reinstalling, you may only need to restart your computer
to complete the installation. However, if a setup wizard opens when you
restart your computer, follow the on-screen instructions.
Help and
Support
For more information on reinstalling device drivers, click
Start, then select Help and Support.
To Next Page
Loading...
