Gator ETX Soft Tri-Fold Tonneau Covers
2303 SE 17th Street, Suite 102, Ocala, FL 34471
TEL: 1-833-336-6121
E-MAIL: etxsoftfold@gatorcovers.com
SPECIAL INSTRUCTIONS
FOR FACTORY RAILS/TRACKS
Vehicles with factory rail/track systems require
the following clamp kits for installation
DODGE DAKOTA
NISSAN FRONTIER 2005-
ALL OTHER CARGO MANAGEMENT EQUIPPED TRUCKS
PART NO: VEHICLE DESCRIPTION
22440504 CHEVROLET/GMC SILVERADO/SIERRA with Track System
22440504 FORD F-150 with Track System
22440702 DODGE DAKOTA with Track System
22440304 NISSAN TITAN 2005-PRESENT with Track System
22440204 NISSAN FRONTIER 2005-PRESENT with Track System
22440104
TOYOTA TUNDRA 2007-PRESENT with Track System
22440104 TOYOTA TACOMA 2005-2015 with Track System
22440100 TOYOTA TACOMA 2016 with Track System
For all rail/track systems, remove any factory bolts from rail channel if they interfere with installing
the slide nut into channel. After installation, reinstall factory bolts as necessary.
TAILGATE CLAMP
Hook clamp
directly into the
factory rail
TAILGATE
CLAMP
Adjust tension by
moving tension
nut into handle
1/2" – 5/8"
CAB CLAMP
Add clamp
plate as
shown here
CAB
CLAMP
Do Not
Overtighten
Do Not
Overtighten
Do Not
Overtighten
Do Not
Overtighten
Addclampplate
asshownhere
Addclampplate
asshownhere