loading the pouch
1 Take your item to be laminated and place in to the appropriate sized laminating pouch
ensuring it is rmly located along the sealed edge This is to help ensure that you get optimal
quality output
Before laminating important or unique documents always run a test pouch through
the laminator using a similar type document
SEALED EDGE
A3, A4, A5, etc. Irregular shaped item
SEALED EDGE
NOTE: Do not cut pouches prior to
lamination
GB
FUSION
™
3000L&3100L A4& A3 LAMINATORS 7
NOTE: During warm up the orange light
next to the mark will be ashing
until the machine is ready to use
With Fusion L you cannot feed
a pouch into the laminator until
green tick is illuminated
Visual & Audible Ready Alerts
7 When the laminator is ready to use the green light next to the tick is illuminated shown in
gure and a series of beeps are heard
To Next Page
Loading...
