Need help?Do you have a question about the GBC HeatSeal H600 Pro and is the answer not in the manual?
General| Control type | Buttons |
|---|---|
| Display type | LCD |
| Product color | Gray |
| Preheating time | - min |
| Built-in display | Yes |
| Lamination speed | - mm/min |
| Number of rollers | 4 |
| Maximum lamination width | 330.2 mm |
| Maximum document thickness | 0.254 mm |
Weight and Dimensions| Depth | 282.7 mm |
|---|---|
| Width | 692.15 mm |
| Height | 419.1 mm |
Explains the safety alert symbol and associated written warnings for potential hazards.
Describes the meaning of ISO and IEC safety symbols displayed on the product.
Outlines fundamental safety measures for the setup and use of the laminator.
Details electrical connection, usage, and outlet safety for the laminator.
Instructions for unplugging the unit before service or cleaning to prevent hazards.
Explains the information displayed on the laminator's LCD control panel.
Describes how to use function keys to perform various operations.
Details the PRE/H, MOUNT, and COLD mode buttons and their functions.
Explains keys used to adjust laminating temperature and roller speed.
Describes the function of STOP, REV, and MEAS/STOP control buttons.
Guides through connecting power and preparing for hot lamination.
Details the steps for performing hot lamination with the machine.
Explains how to set the machine to a stand-by mode at 80°C using PRE/H.
Guides through initial setup for cold lamination.
Details the steps for performing cold lamination using the machine.
Instructions for mounting documents using GBC Designer Frames.
Guidance on using GBC Creative Foils for special applications.
Instructions for using GBC Soft Touch Pouches.
Details on using GBC Transfer Paper for image transfer.
To Next Page
