To Next PageTo Next Page
Need help?Do you have a question about the GBC Shredmaster 3870M and is the answer not in the manual?
General| Brand | GBC |
|---|---|
| Model | Shredmaster 3870M |
| Category | Paper Shredder |
| Language | English |
Read instructions and observe safety precautions before operating the machine.
Ensure children do not operate the machine.
Avoid reaching hands into the cutting mechanism.
Keep long hair away from the cutting mechanism.
Avoid loose clothing, ties, and dangling items.
Be careful of loose jewelry, especially necklaces.
The shredder must not operate with the door open.
Ensure free access to the mains power socket.
Turn off the machine if it will not be used for an extended period.
Always unplug the machine before cleaning or attempting repairs.
Do not operate the machine without the safety flap in place.
Use the ON/OFF button for quick stopping and opening the door.
Place the shredder unit on the cabinet, ideally with two people.
Place the plastic bag in the pull-out waste receptacle.
Close the door and plug the machine into the wall socket.
Press button; green light indicates readiness. Starts automatically with paper.
Machine stops automatically when paper shredding is complete.
Machine stops if the door is opened; red indicator lights up.
Machine stops if the bag is full; yellow indicator lights up.
Stops for too much paper; auto-reverse for jams; symbol flashes.
Use reverse button, remove paper, and feed in smaller quantities.
Stops if flap opens. Machine reverses briefly to clear debris.
Oil the cutting mechanism when performance reduces or after emptying bin.
Check plug connection, ready indicator, and power.
Verify power connection and green LED indicator status.
Ensure paper is fed centrally into the opening (photo cell).
Verify door is closed and waste bag is not full.
Ensure the safety flap is closed for proper operation.
Address indicator light if bag is not full; clean mechanism with brush.
Disconnect power and clean the photo cell sensor with a brush.
Machine stops due to overload; allow it to cool down for 5 minutes.
Contact customer support if problems persist after troubleshooting.
Do not shred paper clips with model 3890D.
Machine must retain original identification label for warranty claims.
List of recommended accessories including oil and bags.
Environmentally friendly oil for shredder maintenance.
Plastic bags designed for collecting shredded paper.
GS, CE, Nemko, UL certifications and EC directives compliance.
Details on machine's sound level and ISO 7779 standard.
Statement of compliance with relevant EC directives and harmonised standards.
Details of the 2-year warranty on materials and workmanship.
Information on the 20-year warranty for cutting blades.
Address and website for ACCO Brands Europe.
