WATCH FEATURES:
SCREW DOWN CROWN
Screw down crowns are used to ensure water
resistance. Do NOT pull crown unless it is unscrewed
first
• UNSCREW the crown counter-clockwise (towards
you) until it turns freely without tension.
• GENTLY pull the crown out to desired position for
watch setting (see specific operating instructions on
following pages).
• When finished setting the watch, GENTLY push the
crown in towards the watch.
• While pushing in on the crown, begin to turn
clockwise (away from you) until it is SECURELY
screwed down.
NOTE: Failure to securely screw down the crown after setting the watch may
affect its water resistance.
To Next Page