To Next PageTo Next Page
Need help?Do you have a question about the GD Midea Refrigeration Equipment MSG-18HRN2 and is the answer not in the manual?
General| Brand | GD Midea Refrigeration Equipment |
|---|---|
| Model | MSG-18HRN2 |
| Category | Air Conditioner |
| Language | English |
Highlights the compact nature of the unit's design.
Emphasizes the unit's energy efficiency and low noise levels.
Provides dimensional data for MSG-07/09 series indoor units.
Details dimensions for the MSG-12 series indoor units.
Illustrates the refrigeration circuit for both cooling and heating modes.
Depicts the refrigeration circuit specific to cooling-only operation.
Defines the permissible operating temperature ranges for cooling mode.
Specifies the acceptable operating temperature ranges for heating mode.
Provides wiring diagrams for cooling-only operation.
Detailed wiring for MSG-07CRN2 and MSG-09CRN2 cooling models.
Wiring details for MSG-07HRN2 and MSG-09HRN2 in heating/cooling.
Addresses common issues and solutions for cooling-only air conditioners.
Guides on diagnosing and resolving problems with heat pump models.
Outlines the environmental and electrical conditions for control systems.
Defines symbols used throughout the manual for enhanced understanding.
Lists and explains the various systematic functions of the air conditioner.
Details specific protection mechanisms for the compressor, including delays.
Covers protections related to sensors, fuses, and fan speed control.
Details warnings for cross-zero signals and current protection of the compressor.
Describes Fan-only and Cooling modes, including their specific actions.
Details valve action, compressor/fan behavior, and protections in dehumidifying mode.
Explains valve, fan, and compressor actions and fan settings in heating mode.
Describes automatic fan speed adjustments during heating based on temperature.
Details high-temperature protection for the indoor evaporator during heating.
Explains conditions and timing for defrosting cycles in heating mode.
Outlines criteria for ending defrost and specific defrosting actions.
Explains how the unit automatically selects cooling, heating, or fan-only modes.
Details forced cooling and forced auto modes, including operation and protection.
Describes the timer function for controlling unit operation schedules.
Explains the energy-saving function for cooling, heating, and auto modes.
Details the unit's behavior and settings after a sudden power failure.
