To Next PageTo Next PageWhat to do if GE Consumer & Industrial UPS buzzer sounds 1x/4sec and the overload symbol is lit?
If the GE Consumer & Industrial UPS is overloaded during DC mode, and the overload symbol is lit while the buzzer sounds once every 4 seconds, the unit may shut down within 15 seconds. To resolve this, reduce the load and restart the UPS.
Why is my GE Consumer & Industrial UPS always in battery mode?
If your GE Consumer & Industrial UPS is in battery mode constantly, check the following: * Ensure the power cord is properly connected. * Reduce the load and reset the circuit breaker if the input circuit breaker has tripped. * Contact a qualified electrician to inspect the wall socket outlet for issues, or if the mains voltage is out of specified limits.
Power| rating VA/W | 1000/800 |
|---|---|
| AC input voltage | 208 / 220 / 230 / 240Vac |
| AC input voltage range | 120 ~ 280Vac |
Battery| battery type | 12V, sealed lead acid, maintenance free |
|---|---|
| nominal voltage | 24 Vdc |
| number x capacity of battery | 2x9Ah |
Weight and Dimensions| weight | 16 kg |
|---|---|
| dimensions | 88x440x405 mm |
| enclosure / protection | steel-plastic / IP20 |
Power| rating VA/W | 2000/1600 |
|---|---|
| AC input voltage | 208 / 220 / 230 / 240Vac |
| AC input voltage range | 120 ~ 280Vac |
Battery| battery type | 12V, sealed lead acid, maintenance free |
|---|---|
| nominal voltage | 48 Vdc |
| number x capacity of battery | 4x9Ah |
Weight and Dimensions| weight | 32 kg |
|---|---|
| dimensions | 88x440x620 mm |
| enclosure / protection | steel-plastic / IP20 |
Power| rating VA/W | 3000/2400 |
|---|---|
| AC input voltage | 208 / 220 / 230 / 240Vac |
| AC input voltage range | 120 ~ 280Vac |
Battery| battery type | 12V, sealed lead acid, maintenance free |
|---|---|
| nominal voltage | 72 Vdc |
| number x capacity of battery | 6x9Ah |
Weight and Dimensions| weight | 38 kg |
|---|---|
| dimensions | 88x440x620 mm |
| enclosure / protection | steel-plastic / IP20 |
