ww_.GEAppliances.com
Behind the Refrigerator
Be careflll when moving the refrigerator
a_a_ayfrom the wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those with
embossed surfhces.
Turn the leveling legs at each front corner
of the refrigerator counterclockwdse until
the rollers support the refrigeraton Pull the
refrigerator straight out and return it to
position by pushing it straight in. Moving
the refrigerator in a side direction may
result in damage to the floor covering or
refrigerator.
Whenpushingthe refrigeratorback,makesure
youdon'troll over thepower cordoricemaker
supplyline (onsomemodels).
Enpoussantle rfifrig#rateurenplace,veiller# ne
pasle fairaraulersurle cordond'alimentationou
lacanalisationd'eaude la machine,)glawns
(surcertainsmodOles).
After rolling the refrigerator back into
place, turn the legs clockwise until the
legs again bear the weight of the
refrigeraton
Light Bulb Replacement
To replace a burned-out bulb, unplug
the refrigerator from its electrical outlet,
unscrew the bulb when cool and replace
it with an appliance bulb of the same or
lower wattage.
Turningthe controlto theOpositiondoesnot
removepower to thelight circuit.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refYigeratol: Move
the temperature control dial to the 0
position, and clean the interior with a
baking soda solution of one tablespoon
(15 ml) of baking soda to one quart
(1 liter) ofwatm: Leave the doors open.
Set the icemaker power s,Mtch to the
0 (off) position or move the feeler arm to
the STOP (up) position (depending on
model) and shut off the water supply to
the refrigerator:
If the temperature can drop below
freezing, have a qualified servicer drain
the water supply system (on some
models) to prevent serious property
damage due to flooding.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
Besure therefrigeratorstaysin an upright
positionduringmoving.
13