GE 16 - Page 37

Using the surface units.
GEAppliances.ca
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either direction
At both OFF and Max the control clicks into
to the setting you want.
position. You may hear slight clicking sounds
during cooking, indicating the control is
keeping the power level you set.
Be sure you turn the control knob
to OFF when you finish cooking.
e
Indicator Lights (on radiant glass models only)
A Hot indicator light will glow when any radiant
element is turned on, and will remain on until
the surface is cool enough to touch .
A
Burner On indicator light will glow when
any surface unit is on .
NOTE: The Hot indicator light may glow between
the surface control settings of Min and OFF,
Hot
Chaud
Burner
On
e
Surlace
deculsson
but there is no power to the surface units.
7