TELEPHONE CONTROLS
1.HOOKSWITCH
2. FLASH BU~ON
3. RINGER LOUDNESS SWITCH
4. MICROPHONE
5. FCC and MODEL LABEL
6. REPLACEABLE CORD
Tangle-resistant and replaceable cord for convenience.
7.PHONENUMBER LOG
Recordthe names and numbersofthe peopleyou most
frequently call.
8.CRADLE
9.TELEPHONE NUMBER DISPLAY
10.PULS~ONE SWITCH
TouchTone or Pulse Dialing, orcombinations ofTone and
Pulse, foraccess to long distance service
11.REDIALBUTTON
Forquickcall-back of last numberdialed.
,
12.EARPIECE
Tone Feedback
Confirms each digit wasdialed.
TELEPHONE OUTLET REQUIREMENTS
A modular (Universal Service
Order Code) USOC; CAI1 A outlet
editjack (example illustrated) is
required.
Installation of this telephone in
locations with 4-prong jacks or with
hard-wired outlets will require additional Converters.
(not included). The dealer from whom you purchased
your
phone or a telephone supply store can advise you regarding
the proper Converter.
*
.>.
.-
.“
To Next Page
Loading...
