GE 25008 - Page 10

10
Programming Your Remote, cont.
• Press and hold the SETUP button for 2 seconds or
until the red indicator light turns on, then release
the SETUP button.
• Press and release the FAV button. The red
indicator will blink once and remain on.
• Press and release the numerical button (0 – 9) that
you will use for storing your favorite channel. The
red indicator will blink once and remain on.
• Enter the channel number you wish to program,
for example channel 4, 21, 4-1, 52-2.
• Press and release the FAV button, the red indicator
will turn off. Your favorite channel is now saved.
• Using Favorite Function
• Press and release the FAV button. The red
indicator light will turn on.
• Press and release the programmed button (0-9)
The red indicator will blink twice and the remote
will send the code for your pre-programmed
channel.