C-2 Series 90-30 PLC Installation and Hardware Manual
–
August 2002 GFK-0356Q
C
H
N
N
ISOLATED
ADAPTOR
J1 J2
POWER
FUSE-1AMP
(SIDE
VIEW)
POWER
CORD
POWER
CORD
SWITCH
FUSE
FUSE
115VAC
230VAC
RS232C
RS422
RS422
(TOP VIEW)
(BACK
VIEW)
Figure C-1. Isolated/Repeater Converter
Items of interest to the user on the Isolated Repeater/Converter are described below.
Two 25-pin female D-type connectors (Two 25-pin male, D-type connectors (solder pot), are
included for user cabling.)
5/230 VAC power connection (internal) 4-position terminal block.
Fused Amp power protection.
Power ON (green) indicator LED.
Three-position toggle switch, recessed in the back of the unit, is set according to the system
configurations shown later in this appendix.
To Next Page
Loading...
