GE AF-650 GP - Earthing Screened Cables Best Practices

OR
2. While still in Set-up 1, copy Set-up 1 to Set-up 2. Then set par. K-12 This Set-up Linked to to Set-up 2 [2].
This will start the linking process.
After the link is complete, par. K-13 Readout: Linked Set-ups will read {1,2} to indicate that all ‘not change-
able during operation’ parameters are now the same in Set-up 1 and Set-up 2. If there are changes to a
‘not changeable during operation’ parameter, e.g. par. P-30 Stator Resistance (Rs), in Set-up 2, they will
also be changed automatically in Set-up 1. A switch between Set-up 1 and Set-up 2 during operation is
now possible.
[0] * Not linked
[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
AF-650 GP Programming Guide
29
3