GE AF-650 GP - Introduction to Test Procedures; Tools Required for Testing

[14] Jog
[15] Preset reference on
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze reference
[20] Freeze output
[21] Speed up
[22] Speed down
[23] Set-up select bit 0
[24] Set-up select bit 1
[28] Catch up
[29] Slow down
[34] Ramp bit 0
[35] Ramp bit 1
[55] DigiPot increase
[56] DigiPot decrease
[57] DigiPot clear
[58] DigiPot Hoist
[62] Reset Counter A
[65] Reset Counter B
[70] Mech. Brake Feedb.
[71] Mech. Brake Feedb. Inv.
E-54 Terminal X30/3 Digital Input
Option: Function:
[0] * No operation This parameter is active when option module OPCGPIO General Purpose I/O Option Module is installed in
the frequency converter.
[1] Reset
[2] Coast inverse
[3] Coast and reset inv
[4] Quick stop inverse
[5] DC-brake inverse
[6] Stop inverse
[8] Start
[9] Latched start
[10] Reversing
[11] Start reversing
[12] Enable start forward
[13] Enable start reverse
[14] Jog
[15] Preset reference on
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze reference
[20] Freeze output
AF-650 GP Programming Guide
71
3