ActionStep
Register the column using the Barcode Scanner 2-D as follows:3
•
Make sure that the pointer is placed in the first position of the Code box.
•
Point the Barcode Scanner 2-D towards the data matrix tag on the col-
umn.
•
Press and hold the trigger to create a beam.
•
When the scanner beeps, the column ID is registered and displayed in
the dialog box.
•
Alternatively, manually enter the column ID, that you find on the column
label, in the dialog box using your keyboard.
•
Click Continue.
Result: The expanded New Column dialog box opens.
ÄKTA avant Operating Instructions 29101556 AB 139
6 Run a method
6.3 Start a method run
To Next Page
Loading...
