GE AKTA avant - Start UNICORN and Connect to the System

5.3 Start UNICORN and connect to the system
Introduction
This section describes how to start and log on to UNICORN and how to connect the in-
strument to UNICORN.
Start UNICORN and log on
Follow the instructions to start UNICORN and log on to the program. A valid e-license
must be available for the workstation. See UNICORN Administration and Technical Manual
for more information about e-licenses.
ActionStep
Double-click the UNICORN icon on the desktop.1
Result: The Log On dialog box opens.
Note:
If there is no connection to the database it is still possible to log on to UNICORN
and control a running system. The Log On dialog box will give the option to
start System Control without a database. Click Start System Control to
proceed to the next Log On dialog box.
162 ÄKTA avant User Manual 29035184 AE
5 Operation
5.3 Start UNICORN and connect to the system